Acrylic Sign Installation Instructions

Step 1: Unpack Your Sign

• Carefully remove all packaging.
• Your sign pieces will be secured inside the template with a cardboard backing for protection during shipping.

Step 2: Separate the Pieces from the Template

• Place the template on a clean, flat surface.
• Carefully remove the acrylic sign pieces from the template and set them aside on the flat surface.
• Once all pieces have been removed, gently remove the tape holding the cardboard backing to the template and discard the cardboard.

Step 3: Assemble the Template

• If your template arrived in multiple sections, align the sections together and tape them together.
• Make sure all sections line up correctly before moving to the wall.

Step 4: Position the Template

• Align the template where you would like the sign installed.
• Use a level if desired to ensure proper placement.
• Once you're happy with the position, secure the template to the wall using painter's tape.

Step 5: Install the Sign

• Remove the adhesive backing from each piece one at a time.
• Place the acrylic pieces back into their corresponding locations within the template.
• Press each piece firmly onto the wall for 20–30 seconds.

Step 6: Remove the Template

• Once all pieces have been installed, carefully remove the template from around the letters and logo pieces.
• Remove any remaining painter's tape.

Care Instructions

• Use the included microfiber cloth to remove dust or fingerprints.
• For best results, install on a clean, dry, smooth surface.